Self-service car wash steps
2021-11-12
The steps of self-service car washing usually include the following steps:
Start the device. Start the self-service car washer by scanning the body QR code, swiping the card, or using WeChat, Alipay, etc.
Flush the body. Turn on the clean water mode, use the high-pressure water gun to wet the car body, and make sure that the clean water covers all parts of the car body. When washing, first point the water gun at an area of the car body, such as the wheel, and then gradually move to other parts of the car body.
Spray foam. Switch to foam mode, use a foam gun or water gun to spray car wash fluid foam to evenly cover the body. Pay attention to avoid excessive concentration when spraying foam to avoid excessive local foam.
Wipe the body. Use a mop, car wash gloves, or a special car wash brush to wipe the car body, which helps remove stains and dirt from the car body.
Rinse again. Switch back to the clean water mode, and use the high-pressure water gun to thoroughly rinse the foam and stains on the body to ensure that the body is clean and free of residue.
Dry the body. Use a clean towel or a special car wash towel to dry the body. Be careful to avoid using towels with sand to avoid scratching the paint.
Interior vacuuming. If necessary, use a vacuum cleaner to clean the car.
Sterilization (optional). If you need to disinfect the vehicle, you can use the disinfection function.
Please note that the specific steps may vary according to the model and brand of the self-service car washer. It is best to read the instructions or follow the instructions on the machine before use.
Key words:
Previous Page
Previous Page
Related News
Operation Center: 202, Building 1, Hamani Plaza, No.2 Huli Avenue, Huli District, Xiamen City
Factory Address: 188 Xintian Road, jimei district, Xiamen City
Public Number
